Wagner 2021 Catalog

Inside of Post Mount - Swaged You can use our Invisiware ® Fixed Tabs, Threaded Tabs or Lag Eyes to mount Adjust-A-Jaw ® Tensioners to your end posts. Or, you can mount them using flat bar or angle iron welded to your post with holes drilled to accept the clevis. Adjust-A-Jaw ® Tensioners The Adjust-A-Jaw ® is an exposed, swaged, tensioning, face-of-the- post-mounted fitting that can be used on level or pitched runs. The Adjust-A-Jaw can be used with any fitting on the opposite end of the run.

Unlike many common turnbuckles, Ultra-tec ® Tensioners have no sharp edges, no crevices to collect dust and dirt, no unsightly nuts on the end, ugly swaged shanks or anything that will scratch or snag.

e

k

g

l Closed

CRAJ82 Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must also be purchased separately. lr ln d OneSideOnly l Open

STANDARD PRODUCTS RAILING SYSTEMS

Cable

d

e

g

k

Closed I

Open I

In

Ir

t

Screw is Included Also Order Ferrule No.

Stainless

CRSC6 CRSC6 CRSC8 CRSC8 CRSC8

1/8”

.26" .26" .39" .39" .39"

1/4-28 .260" 1/4-28 .260"

.56" .56" .75" .87" .87"

4.30" 4.30" 4.87" 6.74" 6.74"

5.99" 5.99" 6.43" 9.28" 9.28"

.375" .375" .500" .620" .620"

2.75" 2.75" 3.00" 4.50" 4.50"

5/16-24 LH 5/16-24 LH 7/16-20 LH 9/16-18 RH 9/16-18 RH

CRF4

CRAJ62 CRAJ62 CRAJ82 CRAJ122 CRAJ122

3/16”

CRF6

1/4”

3/8-24 .313"

CRF8

5/16”

3/8-24 .348" 3/8-24 .348"

CRF10

3/8”

CRF12

e

Ultra-tec ® Fixed Jaw The Fixed Jaw is an exposed, swaged, non-tensioning, face-of- the-post-mounted fitting that is suitable for use on level or pitched runs. This fitting was designed to be compatible in appearance to the Adjust-A-Jaw ® tensioning fitting. The Fixed Jaw can be used with any tensioning fitting on the opposite end of the run.

g

k

d One Side Only

l

CRFJ62

LONG LENGTHS CUSTOM SERVICES INDEX

Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must also be purchased separately.

Also Order Ferrule No.

Cable

d

e*

g

k

I

Screw is Included

Stainless

1/8"

.26" .26" .39" .39" .39"

.260" .260"

.56" .56" .75" .87" .87"

1.75" 1.75" 2.12" 2.25" 2.25"

CRSC6 CRSC6 CRSC8 CRSC8 CRSC8

CRF4 CRF6 CRF8 CRF10

CRFJ62 CRFJ62 CRFJ82 CRFJ122 CRFJ122

1/4-28 1/4-28 3/8-24 3/8-24 3/8-24

3/16"

1/4"

.313"

5/16"

.348" .348"

3/8"

CRF12

Ferrule

Clip

e

Ferrule

Ultra-tec ® Clip-On Fixed Jaw The Clip-On Fixed Jaw is externally a duplicate of the Fixed Jaw. The Clip-On Fixed Jaw was created for applications that called for factory swaged fittings on both ends of the cable, without requiring over-sized holes through the intermediate posts (so an entire Fixed Jaw could pass through). This fitting accomplishes that with a .250” diameter ferrule that is pre-swaged to the cable. Cable d e* g k I Screw is Included

Clip

e

g

k

CRFJC2-4

g

k

d One Side Only

l

d One Side Only

l

Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must also be purchased separately.

Also Order Ferrule No.

Stainless

1/8"

.26" 1/4-28 .260" .56" 1.75"

CRSC6 CRSC6

CRF4 CRF6

CRFJC2-4 CRFJC2-6

3/16" .26" 1/4-28 .260" .56" 1.75"

See WagnerCompanies.com/catalog/page-152 for information on cable installation.

Learn more or order at WagnerCompanies.com

157

Made with FlippingBook - Online magazine maker