Wagner 2021 Catalog

Installation Tools

Model 610 Swager For 3/16” cable and smaller. Requires a hydraulic power source capable of 10,000 psi. The oil capacity at full stroke is 105 cu. in.

Description

Part Number

CR610

Swager

CRWAGNER610

Rental Kit

CR610

Model 650 Swager For 1/8”-3/8” cable. Requires a hydraulic power source capable of 10,000 psi.

Description

Part Number

CR650

Swager

CRWAGNER650

Rental Kit

CR650

Model 610 Swager - Shipping Container/Tool Box With compartments for cable cutting and installation tools.

Part Number CR610TOOLBOX

CR610TOOLBOX

Model 650 Swager - Shipping Container/Tool Box With compartments for cable cutting and installation tools.

Part Number CR650TOOLBOX

CR650TOOLBOX

Air Over Hydraulic Pump Air driven, air compressor required. Capable of delivering a maximum of 10,000 psi. A 20-gallon minimum tank size is recommended. A functional pressure regulator set at 100 psi maximum is

Part Number CRHP

required—90 psi minimum to get Swager to apply full force—otherwise swaging pump may be damaged. Minimum 1/4” ID air hose with a 1/4” male pipe thread—not included. Note: Should you experience excessive leakage during operation, discontinue use and contact Wagner. CRHP

Electric Hydraulic 120V Pump Increases swaging speed. Circuit designed to handle this load. Use heavy-duty extension cords. Note: Draws 25-27 amps. Be sure it is powered properly or damage could occur.

Part Number CRHPE

CRHPE

P 414-214-0444 T 888-243-6914

170

F 414-214-0450