Wagner 2021 Catalog

Bronze Handrail Mouldings Forged lamb’s tongues, corners and bends are forged from sections of handrail to match handrail sections. All forged handrail ends are handmade and can vary up to 3/16” in size from one to the next. Please Note: Due to differences in tolerances between handrail extrusions and the cast terminals, joints usually require special finishing to assure an acceptable match.

The ICC, 2010 ADASAD and ANSI A117.1 use the following definition for non-circular handrails: 505.7.2 Non-Circular Cross Sections: Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4” (100 mm) minimum and 6 1/4” (160 mm) maximum, and a cross-section dimension of 2 1/4” (57 mm) maximum. Many Wagner handrail sections meet this definition but you should confirm selections with your local code officials prior to specifying.

Handrail • C38500, extruded architectural bronze • 20’ random lengths

2 1 / 4 " 1 5 / 16 " 1 9 / 16 "

2 1 / 4 " 1 9 / 16 "

H5853

H5816

Description

Type

Malleable Iron

Mill Finish Bronze

Satin Finish Bronze

Polished Finish Bronze

H5853

H5853.4

H5853.7

Handrail: 3.060 lb/ft

Extruded Extruded

H5816*

H5816.4*

Handrail: 2.100 lb/ft

H5853AL

Senior Lateral Scroll Left

Cast Cast Cast Cast Cast Cast Cast

H5853AR

Senior Lateral Scroll Right

H1150BL•

H5150BL

Senior Lateral Channel Left

H1150BR•

H5150BR

Senior Lateral Channel Right

H5853G H5853K H5853KK H5853TE.4

Volute

Corner Bend

H1150KK•

Channel Corner Bend

H5853TE

H5853TE.7

Square Terminal End

Forged Forged Forged Forged Forged

H5853SFLT

H5853SFLT.4

H5853SFLT.7

Straight Forged Lamb’s Tongue

H5853SCLT

H5838SCLT.4

H5853SCLT.7

Straight Cut Lamb's Tongue

H5853BFLT

H5853BFLT.4

H5853BFLT.7

Beveled Forged Lamb’s Tongue

H5853BCLT

H5853BCLT.4 C5120512.4 † C5150512.4 †

H5853BCLT.7

Beveled Cut Lamb's Tongue

C5120512 †

1 1/4" Channel, Sharp Corners 1 1/2" Channel, Sharp Corners

Extruded Extruded

C1150512•

C5150512.7 †

Channel

a

t

b

C1120512

Sharp Corners Mill Finish Bronze

Sharp Corners Satin Finish Bronze

Sharp Corners Polished Finish Bronze

b

a

t

Mill Finish Steel Hot Rolled Sharp Corners Mill Finish Aluminum

C1100512 C1120512 C1150512

C2100512 C2120512 C2150512

C5100512 † C5120512 †

C5100512.4 † C5120512.4 † C5150512.4 †

1"

1/2"

1/8" 1/8" 1/8"

1 1/4" 1/2" 1 1/2" 1/2"

C5150512-16 †

C5150512.7 †

* Not suitable for bending † Denotes 16’ lengths • Steel/malleable iron

P 414-214-0444 T 888-243-6914

ISO 9001:2015 F 414-214-0450

194